Clamps and couplers - half, swivel, self-lock and quick couplers for 48 to 51mm scaffold and fly-bar tube, load-rated and stocked by TSA
The fittings that hold the rig.
Half, swivel, self-lock and quick couplers for 48 to 51mm scaffold, truss and fly-bar tube. Load-rated, stamped, and stocked in black and silver - supplied and supported Australia wide.
- 48-51 mm Standard tube fit
- 750 kg Top half-coupler WLL
- 360° Swivel rotation
Four families.
One tube standard.
Every coupler in the range fits 48 to 51mm scaffold, truss and fly-bar tube, so one fitting standard works across your rig. Start with the family that matches the job, then spec the working load.
The fitting that
holds the rig.
A coupler is the fitting that connects gear to a tube. All four types fit 48 to 51 mm scaffold, truss and fly-bar tube and are supplied load-rated and stamped with a working load limit. Part of the full Lifting & Rigging range.
- Half coupler. Clamps one tube for a fixed point: lights, speakers, pipe-and-drape.
- Swivel. Joins two tubes at any angle.
- Self-lock. Grips under load, fast to rig and de-rig.
- Quick. Hook on, tighten, move on.
Couplers on the tube,
where they work.
Half couplers and G clamps on truss tube, close up. Select a numbered pin to see what each fitting does.
From fly bars to ground support.
Schools & education
Rated, stamped fittings a school crew can rig and check with confidence.
Performing-arts venues
Half couplers off the fly bars - lights, speakers and pipe-and-drape.
Touring & production
Swivel and quick couplers to brace and cross-tube truss fast on the load-in.
Film, TV & broadcast
Self-lock couplers for fast grip-under-load fixing on tight strike and rebuild.
Pick the coupler,
not the compromise.
Four coupler families on one tube standard. Pick by the job.
One jaw. One fixed connection.
A single forged jaw on one tube: the fixed-point fixing for lights, speakers and pipe-and-drape.
Two tubes, any angle.
Two jaws on a central pin join two tubes and rotate a full 360 degrees, for bracing, cross beams and non-standard structures.
Hooks on. Grips under load.
Hooks onto the bar and grips automatically as soon as the load applies; you set final tension with the T-handle. Fast and secure for quick installs and de-rigs.
Hook, tighten, go.
Hook it on, tighten, move on: the time-saver for hanging fixtures without threading a bolt every time.
Not sure which coupler your rig needs? Tell us the tube size, the load and the angle, and we will spec it. Couplers pair with the LITEC truss range and the full rigging line.
Australia wide
Held in stock. Supplied Australia wide.
Common couplers ship fast, in black and silver, supplied and supported by our team.
Four coupler families on one tube standard. Pick by the job.
Above the stage A truss grid rigged in a concert hall.The hardware
behind the show.
The rigging behind real shows - specified, supplied and supported by the team that knows the hardware on the bar.
See all projects
36 hoists, one ceiling.
A 36-axis hoist array and five-chord box truss - every fixture in the air on rated, stamped fittings.
Read the project
4,000 shows. Zero missed cues.
Seven-plus years keeping five performer flying rigs and the automation system rated and show-ready.
Read the project
Rated fittings a hall can rely on.
Couplers, clamps and rigging hardware a teacher or casual crew can rig and check with confidence.
Explore schoolsThe range, in your inbox.
Clamps and couplers on the pipe, on the job
Couplers and clamps fitted to pipe grids, battens and truss in fly towers, on stages and on event floors.
Questions
about clamps & couplers.
If your question isn't here, call us or send your tube size and load - we'll come back with the right coupler for the job.
Call 1300 439 872 →- Half coupler: a single jaw on one tube for a fixed-point connection. The fit for hanging lights, speakers and pipe-and-drape.
- Swivel coupler: joins two tubes and rotates a full 360 degrees. Handles bracing, cross beams and non-standard structures where tubes meet at an angle.
- Half couplers: 100, 500 and 750 kg
- Swivel couplers: 100, 200 and 500 kg
- Self-lock and quick couplers: 250 kg
Tell us what
your rig needs.
Send the tube size, the load and the angle. We will spec the right couplers, supply them, and support them - here and on the road.
- We talk. The tube size, the load and the angle.
- We spec. The right couplers.
- We supply. Supplied and supported, here and on the road.